DS Produkte Z 09625 Mode D'emploi page 17

• Never expose the device to extreme temperatures, severe tem-
perature fl uctuations, open fl ames, direct sunlight, moisture or
wetness.
• Do not allow the device to fall and do not subject it to strong
percussions.
• Never place heavy objects on the device.
• Do not insert anything in the openings / nozzles of the device
and make sure that they are not plugged.
• Empty and clean the dust bin after every use. The fi lters must
also be cleaned regularly to prevent the motor from being over-
loaded.
• Never leave the device unattended when on or when connected
to the mains supply.
• Immediately turn the device off by pulling the mains plug out of
the socket,
– if you stop working with it,
– if you are not using the device,
– before you change the nozzles and other accessories,
– if an error or fault occurs during operation,
– if liquids or debris end up in the device,
– before a storm.
• The device must be deactivated when you pull the mains plug
out of the socket or insert it in the socket.
• Always pull on the plug itself and never on the cord!
• The dust bin and the fi lters must be completely dry before plac-
ing them back in the device.
• Only use original spare parts provided by the manufacturer.
• Do not attempt to grease the wheels of the cleaning head with
lubricants or oil. Otherwise, this may cause more dust or dirt to
accumulate on the wheels.
• When the device is not in use, store it in a cool, dry place that is
not accessible for children and animals.
17 EN