Accessories; Before Initial Use - DS Produkte VC-S1001 Mode D'emploi

Masquer les pouces Voir aussi pour VC-S1001:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Accessories

Turbo nozzle (7): : The turbo nozzle is equipped with rotating cleaning brushes and
is suitable both for carpets and for smooth fl oors.
Floor nozzle: The fl at fl oor nozzle is suitable both for carpets and for smooth fl oors.
Thanks to its fl at construction, even inaccessible areas such as under sofas, radia-
tors etc. can be reached.
Crevice nozzle (14): The crevice nozzle is suitable for cleaning all nooks and cran-
nies that cannot be reached with the other nozzles (e.g. between upholstery). It has
a fold-out brush attachment for cleaning sensitive items such as keyboards.
Brush nozzle (15): Use the brush nozzle for cleaning all uneven objects, furniture,
lamps, profi les and skirting boards, window ledges, etc.
Suction hose (17): The suction hose is attached to the device and the nozzle. The
suction hose can be used to clean places which are diffi cult to reach. It is particularly
suitable for places which are up on high or cleaning the inside of cars.
Carrying strap (16): If you attach the carrying strap which is also supplied to the de-
vice, you can hang it over your shoulder to make it easier to handle the device. We
recommend this particularly when using the suction hose.

Before Initial Use

CAUTION!
❐ Keep children and animals away from the packaging material. There is a danger of
suffocation!
Unpack all parts and check the items supplied for completeness (see the "Items Sup-
plied" chapter) and transport damage. If you fi nd any damage to the components, do not
use them (!), but contact our customer service department.
Telescoping rod (13): The telescoping rod is attached to
the device if it is to be used as a fl oor vacuum cleaner. Two
cable holders for winding up the mains cable are attached
to the rod.
You change the length of the telescoping rod as follows:
1. Press the slider on the telescoping rod downwards
and adjust the rod to the desired length.
2. Release the slider and move the rod a little bit more
until it engages.
19

Publicité

Table des Matières
loading

Table des Matières