Warranty Conditions - DS Produkte ZW-9021-E085 Mode D'emploi

❐ Never touch the device, the cord or the plug with wet hands.
❐ Do not insert anything in the device's openings/nozzles and ensure that they are not
plugged.
❐ Never leave the device unattended when on or when connected to a power supply.
❐ Turn the device off by pulling the mains plug out of the socket
– if you stop using the device,
– if you are fi nished using the device,
– before you change any accessories,
– if an error or fault occurs during operation,
– if liquids or foreign debris have penetrated the device,
– before a storm,
– before you clean the device parts and accessories.
❐ The device must be deactivated when you pull the mains plug out of the socket or
insert it in the socket.
❐ Always pull on the plug itself and never on the cable!
❐ Never move the device by pulling it by the cord. Use the handles.
❐ Do not attempt to grease the wheels with lubricants or oil. Otherwise, this may cause
more dust or dirt to accumulate on the wheels.
❐ Empty the dust bin after every use. The fi lters must also be cleaned regularly to
prevent the motor from being overloaded.
❐ Allow the dust bin, plastic dust fi lter and exhaust fi lter to dry completely before you
reinstall them in the device.
❐ Only use original spare parts provided by the manufacturer.
❐ Store the device in a cool, dry area that is not accessible to children and animals
when not in use.

Warranty conditions

Defects arising due to improper handling, damage or attempts at repair are excluded
from the warranty. This also applies to normal wear and tear.
All manuals and user guides at all-guides.com
21