Prior To First Use; Assembling The Device - DS Produkte 06805 Mode D'emploi

EN
14
13
12
11
10

Prior to First Use

Attaching the Handle to the Device
You will need a cross-head screwdriver.
1. Take the handle (14) and unscrew both screws from the bottom ends of the handle.
2. Insert the handle onto the adapter of the centre piece (13) and screw the screws back
into the boreholes.

Assembling the Device

09840_DE-EN-FR-NL_A5_V3.indb 16 09840_DE-EN-FR-NL_A5_V3.indb 16
16
1 Key for releasing water or cleaning
1
2 Cable mount
2
3 Hook for cable reel
3
4 Mains cable
5 Unlocking lever of the fresh water
4
6 Fresh water reservoir
3
7
8 Unlocking pedal for tipping the
5
9 Suction nozzle and brush (behind
6
10 Base
11 Dirty water reservoir
12 Handle of the dirty water reservoir
13 Centre piece
7
14 Handle
8
Not shown:
•
•
9
1. Lay the dirty water reservoir (11) in the base (10) of the
device and fold down the handle of the reservoir (12) until
it audibly engages.
2. Insert the fresh water reservoir (6) into the centre
piece (13). First insert the valve into the round depression
on the backside of the device and then press the top of the
reservoir against the centre piece until it audibly engages.
solution
reservoir
On / off switch
handle
that)
1 bottle of cleaner
Instruction manual
13.12.2017 15:58:33 13.12.2017 15:58:33