Publicité
Les langues disponibles
Les langues disponibles
1
2
1
4
3
PUSH
TO CLOSE
5, 6, 7
CAMERA
VCR
CARD P.B.
MODE
ON
OFF
5
POWER
4
7
6
SEARCH
Quick Guide
1
Charge the Battery.
≥Connect the AC Cable to the AC Adaptor and AC wall outlet.
≥Attach the Battery to the AC Adaptor. (This will start the charging
process.)
≥When the Charge Lamp [CHARGE] goes off, the Battery is fully
charged.
≥Since the Battery will not be charged when the DC Cable is connected
to the AC Adaptor, disconnect it.
3
CAMERA
VCR
CARD P.B.
2
Attach the Charged Battery to the Palmcorder.
MODE
ON
≥Attach the battery after tilting the Viewfinder upward.
OFF
POWER
3
Turn the Palmcorder on.
≥Slide the
2
OPEN/EJECT
4
Insert the Cassette.
≥Slide the
compartment cover.
≥Insert the Cassette.
≥Press the [PUSH/TO CLOSE]
≥Close the lower compartment Cover.
5
Start recording.
≥Press the
≥Press the
To watch the Playback Picture
6
Switch to the VCR Mode, rewind the tape, and play the tape
back.
≥Slide the
≥Push the
≥Push the
≥Push the
CAMERA
VCR
CARD P.B.
MODE
ON
OFF
7
Turn the Palmcorder off.
≥Set the
POWER
(l 12)
(l 14)
1
Switch to [ON]. (The [CAMERA] Lamp lights up.)
(l 13)
2
lever to the right and pull down to open the Cassette
3
(l 20)
4
Button. (Recording starts.)
4
Button again to pause the recording.
(l 29)
5
Switch to VCR mode. (The [VCR] Lamp lights up.)
6
Lever towards [6]. (Rewind the tape.)
6
Lever towards [1]. (Playback starts.)
6
Lever towards [∫]. (Playback stops.)
(l 14
7
Switch to [OFF].
(l 12)
to load the Cassette.
)
7
Publicité
