Panasonic PV-DV852 Manuel D'utilisation page 38

CAMERA
VCR
CARD P.B.
, 1
1,
MODE
ON
OFF
POWER
MPEG4
VOICE
STILL
2, , 2
CARD MODE
1
CARD CONTENTS
PICTURE
MPEG4
VOICE
2
100-0012
MPEG4
2
VOICE
38
Playing Back Files from the Memory Card
It allows you to play back files recorded on a Card.
≥When you set the Palmcorder to Card Playback Mode, the Card Contents
1
picture and/or voice data) are recorded on the Card.
ª Playing back Still Pictures
1
2
3
1:
5: Playing back the next Picture
6: Playing back the previous Picture
!
3, , 3
∫:
;:
ª Playing back Moving Pictures (MPEG4)
1 1 1 1
SEARCH
2 2 2 2
3 3 3 3
1:
∫:
;:
5: (Stop Mode)To the beginning of the next file.
6: (Stop Mode)To the beginning of the previous playback file.
3
4
≥File is numbered in hexadecimal form.
≥When the object is moving fast or zoom operation is performed, picture may
appear to be still or a mosaic noise pattern appears, but this is not a
malfunction.
ª Playing back Voice
3
1
4
2
3
1:
∫:
3
;:
4
5: (Stop Mode) To the beginning of the next File.
6: (Stop Mode) To the beginning of the previous playback File.
≥If the Operation Lever is pushed towards [6] or [5] for 1 or more
seconds, it becomes 10k playback and if pushed for 7 or more seconds, it
becomes 60k playback. Releasing the Operation Lever brings back to
normal playback.
2
3
4
To adjust the volume (Only Playing back MPEG4 and Voice)
≥During playback, hold down the [PUSH] Dial until the volume indication
appears and rotate it to adjust the volume. (l 29)
are displayed to inform you which kind(s) of data (still picture, moving
Set the Palmcorder to Card Playback Mode.
≥The [CARD P.B.] Lamp lights up.
≥The still picture that was recorded last on the Card is displayed.
Set the [STILL/MPEG4/VOICE] Selector to [STILL].
Start Playback.
Starts Slide Show (The [SLIDE!] Indication is displayed)
Stop the slide playback
Pause slide playback
Set the Palmcorder to Card Playback Mode.
≥The [CARD P.B.] Lamp lights up.
Set the [STILL/MPEG4/VOICE] Selector to [MPEG4].
Start Playback.
Playing back
Stop the playing back
Pause playing back (This button does not pause playing back within
2 seconds of finishing playing back.)
(Playback Mode)To the beginning of the next file picture and start
playback.
(Pause Mode)To the beginning of the next file and turns to Stop Mode.
(Playback Mode)To the beginning of the playback file and start playback.
(Pause Mode)To the beginning of the file under playback and turns to
Stop Mode.
Set the Palmcorder to Card Playback Mode.
≥The [CARD P.B.] Lamp lights up.
Set the [STILL/MPEG4/VOICE] Selector to [VOICE].
Start Playback
Playing back
Stop the playing back
Pause playing back (This button does not pause playing back within
2 seconds of finishing playing back ).
(Playback Mode) To the beginning of the next File and start playback.
(Pause Mode) To the beginning of the next File and turns to Stop Mode.
(Playback Mode) To the beginning of the playback File and start
playback.
(Pause Mode) To the beginning of playback File and turns to Stop
Mode.
Folder-File Number (When the picture or MPEG4 is played back only)
Picture Size (When the picture is played back)
Playback time (When MPEG4 data or Voice data is played back)
File Number