Publicité
Les langues disponibles
Les langues disponibles
CAMERA
1
VCR
CARD P.B.
1
MODE
ON
OFF
POWER
4
PUSH
W.B./SHUTTER/IRIS/
VOL/JOG
3
SEARCH
PUSH
W.B./SHUTTER/IRIS/
A
B
C
D
!
Playing Back
The recorded scene can be played back immediately after recording.
1
Slide the [OFF/ON/MODE] Switch and set the Palmcorder in
the VCR Mode.
≥The [VCR] Lamp lights up.
2
Push the Operation Lever towards [6] to rewind the tape.
≥Rewind the tape to the point where you want to start playback.
≥When the tape reaches the beginning, rewinding stops automatically.
3
Push the Operation Lever towards [1] to start playback.
2
To Stop Playback
3
Push the Operation Lever towards [∫]
≥If a Cassette recorded with copyright protection signals is played back, the
SEARCH
screen becomes blue or mosaic-like noise patterns appear.
2
ª Adjusting the Sound Volume
Until the [VOLUME] Indication
4
. Then, rotate the [PUSH] Dial to adjust the volume. After the adjustment,
press the [PUSH] Dial to make the [VOLUME] Indication disappear.
To adjust the volume with the Remote Controller, press the [T] or [W] Button
to display the [VOLUME] Indication. Press the [T] Button to increase the
volume or press the [W] Button to decrease the volume. The [VOLUME]
Indication goes off 2 or 3 seconds after the adjustment is finished.
≥When the Playback Zoom Function is in use, the sound volume cannot be
adjusted.
≥For other notes, see page 61.
~~~~~~~~~~~~~~~~~~~~~~~~~
Finding a Scene You Want to Play Back
ª Cue/Review Playback
Cue Playback
Push the Operation Lever towards [5]
Review Playback
Push the Operation Lever towards [6]
≥If the Operation Lever is held continuously, it turns to Cue Playback or
2
Review Playback until you release it.
≥If the Operation Lever is pushed briefly, Cue Playback or Review Playback
1
continues even when it is released.
1
ª Hyper Check Function
If you press the [5] Button during fast-forwarding of the tape or the [6]
Button during rewinding of the tape, Cue Playback or Review Playback
continues for as long as the Button is held down.
2
ª Variable Speed Search Function
VOL/JOG
The speed of Cue Playback or Review Playback can be varied.
1
During playback, push the Operation Lever towards [1].
≥[1k!] Indication appears.
2
Rotate the [PUSH] Dial and select a desired search speed.
The following 6 playback speeds are available for the Variable Speed Search
Function in both the fast-forwarding and rewinding directions. 1/5k (slow
playback, SP mode only), 1/3k (slow playback, LP mode only), 1k, 2k, 5k,
10k, and 20k.
R !
≥The same setting can be performed using the Remote Controller's the
[VAR.SEARCH] Button, the [π] Button and the [∫] Button.
Resuming Normal Playback
Push the Operation Lever towards [1].
≥During Cue or Review Playback, fast-moving images may show mosaic-like
noise patterns. This is not a malfunction.
≥The sound is muted during search.
ª Repeat Playback
If you continue to push the Operation Lever towards [1] for 5 seconds or
longer, the Palmcorder switches to Repeat Playback Mode, and the [R !]
Indication appears
[OFF/ON/MODE] Switch to [OFF].)
VCR Mode
1
2
.
3
appears, keep pressing the [PUSH] Dial
A
1
during playback.
B
2
during playback.
C
D
. (To cancel Repeat Playback Mode, set the
29
Publicité
