Panasonic PV-DV852 Manuel D'utilisation page 51

1
1 1 1 1
3 3 3 3
4 4 4 4
5 5 5 5
Verifying and updating driver
Windows 98 SE
Verify and update driver while Palmcorder is connected to the computer.
ª Verifying driver
(Palmcorder must be connected to computer)
1
Select [Start] >> [Settings] >> [Control Panel], double click
[System] select device driver tab, verify [Panasonic DVC
USB Driver] and [Panasonic DVC Port Driver] are displayed
in [Universal Serial Bus controllers] of [Device Manager].
≥If [DVC] is displayed in [Other devices] of [Device Manager] tab, we
recommend updating the driver by following the steps below:
ª Updating driver
1 1 1 1
Select [DVC] in [Other devices] of [Device Manager] and
click [Properties].
2 2 2 2
Select [Driver] and click [Update Driver].
3 3 3 3
Select [Search for a better driver than the one your device is
using now (Recommended)] and click [Next].
4 4 4 4
Select [Specify a location], refer to the location of the driver
and the driver file name, click [Next].
≥Location of the driver (folder) varies depending on the computer used.
(e.g.: C:\\WINDOWS\INF\MTUSDV98.INF)
5 5 5 5
When the dialog to finish appears, click [Finish].
≥Driver update is complete.
51