Publicité
Les langues disponibles
Les langues disponibles
ª Digital Effect Functions (Camera Mode)
(l 27)
≥If you set [EFFECT1] on [DIGITAL EFFECT] Sub-Menu to
[MAGICPIX], you need to adjust the focus manually.
However, you cannot adjust the shutter speed and iris and
cannot select White Balance.
≥If [EFFECT2] on the [DIGITAL EFFECT] Sub-Menu is set
to [MONO] or [SEPIA], the selected White Balance Mode
cannot be changed.
≥You cannot use Program AE with Gain-up Mode
[MAGICPIX].
≥When [PROGRESSIVE] on the [CAMERA SETUP]
Sub-Menu is set to [ON], it is not possible to use any of the
digital modes in [EFFECT1] on the [DIGITAL EFFECT]
Sub-Menu.
Wipe Mode and Mix Mode (Camera Mode) (l 27)
If either one of the following operations is carried out, stored
images will be erased, and Wipe and Mix Functions cannot
be used.
≥Use the Camera Search Function
≥Press the [STILL] Button
≥Switch the [TAPE/CARD] Selector
Multi-Picture Mode (Camera Mode) (l 28)
≥When [PROGRESSIVE] on the [CAMERA SETUP]
Sub-Menu is [ON], Multi-Picture Mode cannot be used.
≥If the [MULTI] Button is pressed while self-recording Mirror
mode (l 20) is used, the still picture is displayed from the
upper right corner of the screen, but, in reality, the picture
is recorded from the upper left corner as usual.
≥The quality of images recorded in Multi Mode deteriorates
slightly.
≥Multi Mode cannot be used in still picture mode or when
mega-pixel recording is set.
P-IN-P Mode (l 28)
≥Pictures in P-IN-P Mode cannot be recorded with
Progressive PhotoShot.
≥If the Palmcorder power is turned off, the smaller picture
will disappear.
≥A title cannot be inserted into the smaller picture.
ª Index Search Functions
≥Index Search may not be possible at the beginning of tape.
≥Because PhotoShot Index Signals are not recorded on still
pictures recorded in Continuous PhotoShot Mode, the
PhotoShot Index Function cannot be used for these still
pictures.
≥Scene Index Search may not function properly if the
interval between 2 scene index signals is shorter than
1 minute.
(l 31)
ª Playback Zoom Functions
≥You cannot adjust volume with the Remote Controller in
Playback Zoom Mode.
≥If you turn off the Palmcorder, or if you switch from VCR
Mode to Camera Mode, Playback Zoom Mode is
automatically cancelled.
≥Even if Playback Zoom Functions are being used, images
that are output from the DV Terminal or Digital Still Picture
Terminal are not enlarged.
≥As you enlarge an image, the quality of image suffers.
≥If you select Multi-Picture Mode in the Playback Zoom
Mode, equivalent magnification (1k) becomes zoom
magnification.
≥During the Playback Zoom Function, the Variable Speed
Search Function cannot be used with the Remote
Controller.
ª Playback Digital Effect Functions
≥Revised signals of images to which digital effects are
added during playback cannot be output from the DV
Terminal or Digital Still Picture Terminal.
≥You cannot use the Wipe Function or Mix Function while
playing back the non-recorded portion of tape.
ª Multi-Picture Mode (VCR Mode)
≥The quality of Multi images deteriorates slightly.
≥Playback multi-mode screens cannot be output through DV
Terminal or Digital Still Picture Terminal.
≥If there is input from the DV Terminal, a multi screen
cannot be created.
≥When signals are input from Video Input/Output Jack or
Audio-Video Input/Output Jack, a multi screen cannot be
re-displayed.
≥Signals input from Video Input/Output Jack or Audio-Video
Input/Output Jack cannot be displayed on a multi screen.
≥If you switch the Palmcorder from the Index Multi-Picture
Mode over to the Camera Mode, the setting of [SCAN
MODE] on the [MULTI-PICTURES] Sub-Menu of the
[CAMERA FUNCTIONS] Main-Menu is automatically set to
[STROBE].
ª Listening to Playback Sound Through
Headphones
(l 29)
If you want to listen to the playback sound of a tape through
headphones, set [AV JACK] on the [AV IN/OUT SETUP]
Sub-Menu to [OUT/PHONES] and connect the headphones
to the [PHONES] Jack on this Palmcorder. In this case, no
sound (including warning sounds and shutter sounds) will be
reproduced through the built-in speaker of the Palmcorder.
When the A/V Cable is inserted into the AV Jack, the internal
speaker works.
ª Selecting the Sound during Playback
(l 29, 34)
You can select the sound by using the [AUDIO OUT] on the
[PLAYBACK FUNCTIONS] Sub-Menu.
STEREO:
Stereo Sound (main sound and subsound)
L:
Left channel sound (main sound)
R:
Right channel sound (sub sound)
≥If you dub a tape recorded at the [12bit] selected as the
[AUDIO-REC] on the [RECORDING SETUP] Sub-Menu,
playback sound becomes stereo sound regardless of the
[AUDIO OUT] setting if [AUDIO] is set to [MIX].
(l 32)
(l 32)
(l 33)
61
Publicité
