Télécharger Imprimer la page

Panasonic PV-DV852 Manuel D'utilisation page 58

Publicité

Les langues disponibles

Les langues disponibles

ª Changing the Counter Display Mode
By changing [C.DISPLAY] on the [DISPLAY SETUP]
Sub-Menu, you can change the Counter Display Mode to
Tape Counter Indication (0:00.00), Memory Counter
Indication (M0:00.00), and Time Code Indication
(0h00m00s00f).
≥You can also press the [COUNTER] Button of the Remote
Controller repeatedly to change the Counter Indication.
ª Displaying Date/Time Indication
To display Date/Time Indication, set the appropriate
date/time in [DATE/TIME] on the [DISPLAY SETUP]
Sub-Menu.
≥You can also press the [DATE/TIME] Button of the Remote
Controller repeatedly to display or change the Date/Time
Indication.
ª Changing the Display Mode
By changing [DISPLAY] on the [DISPLAY SETUP]
Sub-Menu, Counter Display Mode changes to All Function
Display, Partial Display, and Minimum Display.
~~~~~~~~~~~~~~~~~~~
Warning/Alarm Indications
If any one of the following indications lights up or flashes,
please check the condition of the Palmcorder.
EJECT TAPE:
After the [DEW DETECTED]
Indication appears, eject the
Cassette.
Y CHECK REC TAB: The erasure prevention tab on the
inserted Cassette is open (that is,
set to [SAVE]).
When you are attempting to do
audio dubbing on the unrecorded
(blank) portion of the tape, or you
are attempting to do dubbing on the
Cassette whose tab is set at [SAVE].
(l 34, 44, 45)
Y TAPE NOT INSERTED:
No Cassette is inserted. (l 13)
X LOW BATTERY: The Battery is low. Recharge it.
(l 12)
0:
The internal lithium battery is low.
(l 19)
2 END/TAPE END:
The tape ended during recording.
REMOTE/
CHECK REMOTE MODE:
Wrong Remote Controller Mode has
been selected. (l 11)
CANNOT REC LP-MODE:
Because the original recording was
done in LP Mode, audio dubbing
cannot be performed. (l 34)
INCOMPATIBLE DATA:
This Cassette is incompatible or
contains copy-guard.
Because the medium is protected by
a copy guard, images cannot be
recorded correctly.
°:
If this Indication appears, return the
LCD Monitor to the original position
in order to check the specific content
of the Warning/Alarm Indication.
AV INPUT RECORDING:
When you are attempting to record
on the Memory Card during dubbing
(l 44, 45) on the Cassette.
NO CARD:
There is no Memory Card inserted.
58
PLEASE WAIT:
When reading of the Memory Card
(playback, format, when using the
Multi-Picture Function).
(l l l l 38, 39, 43)
CARD ERROR:
The Memory Card is not compatible
with the Palmcorder.
CARD DOOR OPENED:
Card Slot Cover is opened. After
inserting the Memory Card correctly,
close the Card Slot Cover.
CHECK SELECT SWITCH:
With the combination of modes set
with the [TAPE/CARD] Selector and
the [STILL/MPEG4/VOICE]
Selector, this Indication appears:
Pressing the Recording Start/Stop
Button with [CARD] and [STILL] in
Camera Mode.
Pressing the PhotoShot Button with
[CARD] and [MPEG4] or [VOICE] in
Camera Mode.
Pressing the PhotoShot Button with
[TAPE] and [STILL] in VCR Mode.
Pressing the Recording Start/Stop
Button with [TAPE] and [MPEG4] in
VCR Mode.
Pressing the PhotoShot Button with
[CARD] and [STILL] in Card
Playback Mode.
FILE LOCKED:
When you are attempting to delete a
locked picture. The locked picture
cannot be deleted.
WRITE PROTECTED: When you are attempting to write
the data on an SD Memory Card
whose write protection switch is set
at [LOCK].
NO PICTURE:
There are no pictures in the Memory
Card.
NO MPEG4 DATA:
There are no moving pictures in the
Memory Card.
NO VOICE DATA:
There are no voice data in the
Memory Card.
NO TITLE:
There are no titles in the Memory
Card.
NO SPACE LEFT:
Card does not have sufficient
memory remaining.
Select Card Mode and delete
unnecessary files.
CHANGE TO 640a480:Titles cannot be displayed. (l l l l 41)
Set to the [640a480] resolution
setting.
t:
You are attempting to play back a
data which is not compatible with
this Palmcorder. (l l l l 38)
DEW DETECTED:
Condensation has occurred. (l 65)
: NEED HEAD CLEANING:
The video heads are dirty. (l l l l 65)
PUSH THE RESET SWITCH:
Irregular mechanism is detected.
Press the [RESET] Button.
This may solve the problem.
You are attempting to record to a
Memory Card formatted with other
equipment (like a Personal
Computer). Format the Memory
Card with this equipment.
NEEDS TO BE SERVICED:
First disconnect the power supply
and request service.

Publicité

loading