Panasonic PV-DV852 Manuel D'utilisation page 52

1, 1 1 1 1
2 2 2 2
3 3 3 3
4 4 4 4
52
Windows 2000Professional
Verify and update driver while Palmcorder is connected to the computer.
ª Verify driver
(Palmcorder must be connected to computer)
1
Select [Start] >> [Settings] >> [Control Panel], double click
[System] Hardware tab, Device Manager. Verify
[Panasonic DVC USB Driver] and [USB Root Hub] in
[Universal Serial Bus controllers] of [Device Manager] of
[Hardware].
≥If [USB Mass Storage Device] is shown in [Universal Serial Bus
controllers] of [Device Manager] tab, we recommend updating the driver
as described below to Panasonic DVC USB Driver.
ª Updating driver
1 1 1 1
Click [USB Mass Storage Device] of [Device Manager]
2 2 2 2
Select [Driver] and click
3 3 3 3
Select [Search for a suitable driver for my device
(recommended)] and click [Next].
4 4 4 4
Select [Specify a location], refer to the location of the driver
and the driver file name, click [Next].
≥Location of the driver (folder) varies depending on the computer used.
(e.g.: C:\\WINDOWS\INF\MTUSDV2K.INF)
5 5 5 5
When the dialog to finish appears, click [Finish].
≥Driver update is complete.
Update Driver]
[
.