Télécharger Imprimer la page

Panasonic PV-DV852 Manuel D'utilisation page 19

Publicité

Les langues disponibles

Les langues disponibles

CLOCK-SET
YEAR
:2002
MONTH :OCT
DAY
:10
HOUR
: 2PM
MINUTE:30
PUSH MENU TO RETURN
1, 2
PUSH
W.B./SHUTTER/IRIS/
1, 3
MENU
1
CAMERA FUNCTIONS
1.CAMERA SETUP
2.DIGITAL EFFECT
3.CARD SETUP
4.MULTI-PICTURES
5.RECORDING SETUP
6.DISPLAY SETUP
7.OTHER FUNCTIONS
PUSH MENU TO EXIT
1
RECORDING SETUP
REC-SPEED
SP
LP
AUDIO-REC
12bit
INDEX
2HOUR
WIND-CUT
OFF
ZOOM MIC
OFF
ON
AUTO
FLASH
RED EYE REDUCTION
ON
FLASH LEVEL NORMAL
r
RETURN
----
YES
PUSH MENU TO EXIT
2
RECORDING SETUP
REC-SPEED
SP
AUDIO-REC
16bit
12bit
INDEX
2HOUR
WIND-CUT
OFF
ZOOM MIC
OFF
ON
AUTO
FLASH
RED EYE REDUCTION
ON
FLASH LEVEL NORMAL
r
RETURN
----
YES
PUSH MENU TO EXIT
Setting Date and Time
1
Press the [MENU] Button and rotate the [PUSH] Dial to select
[OTHER FUNCTIONS] >> [CLOCK-SET] >> [YES].
2
Rotate and press the [PUSH] Dial to select
[YEAR]/[MONTH]/[DAY]/[HOUR]/[MINUTE] and set it to a
desired value.
≥Year will cycle in the order shown below.
2000, 2001, ..., 2089, 2000, ...
3
Press the [MENU] Button to finish setting the date and time.
≥The clock operation starts from [00] second.
≥The menu will disappear when the button is pressed again.
≥It is possible that the built-in clock in the Palmcorder may become
inaccurate. Please check the time before recording. If the [0] Indication is
flashing, charge the built-in lithium battery and reset the date and time.
VOL/JOG
~~~~~~~~~~~~~~~~~~~~~~~~~
Internal Lithium Battery Recharge
The internal lithium battery sustains the operation of the clock. When the [0]
Indication is lit, the internal lithium battery is near discharge.
1
Connect the AC Adaptor to the Palmcorder with the power
turned off and then connect to the AC Jack.
≥After charging for 4 hours, the built-in lithium battery can power the
clock for approximately 3 months.
~~~~~~~~~~~~~~~~~~~~~~~~~
LP Mode
A desired recording speed can be selected with [REC-SPEED] on the
[RECORDING SETUP] Sub-Menu.
If LP Mode is selected, the recording time becomes 1.5 times longer
than that of SP Mode.
Although the image quality does not decrease with the LP Mode recording,
mosaic-like noise patterns may appear on a playback image, or some normal
functions may be restricted.
≥The contents that are recorded in LP Mode are not completely compatible
with other equipment.
≥Audio Dubbing is not possible with LP Mode. (l 34)
~~~~~~~~~~~~~~~~~~~~~~~~~
OFF
Audio Recording Mode
The sound quality of the recorded sound can be selected with [AUDIO-REC]
on the [RECORDING SETUP] Sub-Menu.
High sound-quality recording is possible with "16bit 48kHz 2 track" Mode.
With the "12bit 32kHz 4 track" Mode, the original sound can be recorded on
2 tracks in stereo, while the other 2 tracks can be used for re-recording.
OFF
1
2
19

Publicité

loading