Télécharger Imprimer la page

Panasonic PV-DV852 Manuel D'utilisation page 37

Publicité

Les langues disponibles

Les langues disponibles


1,
, 1
TAPE
CARD
2, , 2
MPEG4
VOICE
STILL
CARD MODE
!
3,
, 3
R:0h20m
MPEG4
TAPE
CARD
1
MPEG4
VOICE
STILL
2
CARD MODE
3
R:0h20m
VOICE
ª Recording the Moving Pictures (MPEG4)
You can record moving pictures for e-mailing on a Memory Card. The
recorded data can be also played back on Windows Media Player.
Recording from the Palmcorder Lens (Camera Mode)
1
Slide the [TAPE/CARD] Selector to [CARD].
2
Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4].
3
Press the Recording Start/Stop Button.
≥It takes 2 to 3 seconds to start recording.
≥During recording, the [
≥The maximum continuous recording time is 60 minutes
The Palmcorder will automatically stop recording when the relevant
time listed above has elapsed.
≥When Remaining Time Indication becomes [R:0h00m],
[NO SPACE LEFT] Indication appears. Recording may not be started.
≥The shutter speed is adjustable within the range of 1/30 to 1/500 while
recording moving pictures (MPEG4).
≥The picture size of the moving picture (MPEG4) is set to be [176k144].
≥When attaching to email, we recommend the picture size to be less than
1MB (about 1 minute length).
≥The following functions are disabled.
≥Digital Zoom (l 22)
≥Cinema Function (l 23)
≥Digital Effect Functions (l 27)
≥Title In/Creation (l 41)
≥Fade In/Out Function (l 22)
Recording from a Cassette (VCR Mode)
1 1 1 1
Slide the [TAPE/CARD] Selector to [CARD].
2 2 2 2
Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4].
3 3 3 3
Start playback and press the Recording Start/Stop Button at
the desired scene.
Recording from an other equipment (VCR Mode)
1
Slide the [TAPE/CARD] Selector to [CARD].
2
Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4].
3
Input the image from other equipment then press the
Recording Start/Stop Button at the desired scene.
Maximum recording time on the supplied Card (8 MB)
Approximately 6 minutes
≥The video resolution of the camera is reduced when making an MPEG4
recording. This is done in order to optimize the image quality in MPEG4
recordings, and does not reflect a problem with the software or hardware.
≥For other notes, see page 62.
ª Recording Voice (Voice Recording Function)
You can record voice data on a Memory card.
1
Slide the [TAPE/CARD] Selector to [CARD].
2
Slide the [STILL/MPEG4/VOICE] Selector to [VOICE].
3
Press the Recording Start/Stop Button.
≥Voice from built-in microphone is recorded.
≥It takes 2 to 3 seconds to start recording.
≥The recorded file is automatically locked (to prevent accidental
erasure).
≥Voice from external microphone connected to the microphone jack can
also be recorded.
≥During recording, the [
≥If a card is not inserted, the Indication flashes in red.
≥When Remaining Time Indication becomes [R:0h00m],
[NO SPACE LEFT] Indication appears. Recording may not be started.
≥For other notes, see page 62.
] Indication appears and is lit in red.
MPEG4
MPEG4
] Indication appears and is lit in red.
VOICE
37

Publicité

loading