Ending Input And Saving Data; Executing A Command Stack; Entering The Execute Mode; Executing The Command Stack - Pioneer DVD-V8000 Mode D'emploi

07 Function for Commercial Use

4. Ending input and saving data

When ending input following correction of a command stack,
a confirmation message [Save changes ?] will appear.
To save the changes, place cursor on [OK] and
press the ENTER button.
Command Stack
Group(1-001) Command(1-001)
Group001 001 PLAY
002
003
004
005
006
007
008
Save changes ?
Move Select ENTER
To discard changes, place cursor on [CANCEL]
and press the ENTER button.
Command Stack
Group(1-001) Command(1-001)
Group001 001 PLAY
002
003
004
005
006
007
008
Save changes ?
Move Select ENTER
To return to the original input menu, place cursor
on [RETURN] and press the ENTER button.
Command Stack
Group(1-001) Command(1-001)
Group001 001 PLAY
002
003
004
005
006
007
008
Save changes ?
Move Select ENTER
70
OK CANCEL RETURN
Exit SETUP
OK CANCEL RETURN
Exit SETUP
OK CANCEL RETURN
Exit SETUP

Executing a Command Stack

1. Entering the execute mode

To enable the Command Stack execute mode, from the
SETUP menu's [Play Mode] select [Command Stack] and
press either ENTER or the remote control unit's RECALL
button.
Important
¶ To execute a Command Stack, it is necessary that a DVD
disc be loaded in the player.
Command Stack
Group Command(1-001)
Group001 001 01:000301-000601
Group002
Move

2. Executing the Command Stack

2.1 To consecutively execute all commands
within a group
Place the cursor over the [Group] command and
press Play (3), or place the cursor over [Command
001] and press either the Play (3) or ENTER but-
ton.
2.2 To execute one of the group's commands
as a single step
Place the cursor over the desired command and
press the Step (E) button.
¶ Each time the Step (E) button is pressed, the next com-
mand in sequence will be executed.
Command Stack
Group Command(1-003)
Group001 001 01:000901-001201
Group002 002 01:001501-001801
003 REPEAT
Move Step Play
Note
¶ Command Stacks can also be invoked by using the
[WEEKLY TIMER] (page 57) or [POWER ON START] (page
60).
Play Exit SETUP
Exit SETUP