[Aspect Ratio]; [Video Memory] - Pioneer DVD-V8000 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

[Aspect Ratio]

Use to select the aspect ratio of the DVI output.
Use the up/down cursor buttons (», «)
to select [Aspect Ratio] and the right/left
cursor buttons (|, \) to select aspect
ratio, and then press the ENTER button
to confirm.
Resolution
Aspect Ratio
Video Memory
Aspect ratio can be selected from the following.
4:3 (Letter Box)
¶ Select when connecting to a conventional display. Video
software produced in widescreen dimensions will be
displayed in a Letter Box format (described below). This
setting is disabled when not supported by the disc being
played.
4:3 (Pan&Scan)
¶ Select when connecting to a conventional display. Video
software produced in widescreen dimensions will be
displayed in a pan-and-scan format. This setting is disa-
bled when not supported by the disc being played.
16:9 (Wide)
¶ Select when connecting to a widescreen (16:9) display.
16:9 (Compressed)
¶ Select if connecting to a display supporting progres-
sive-can with fixed aspect ratio. When playing video
software recorded in 4:3 aspect ratio on a display that
does not support 4:3, select this format, the original
4:3 image will be displayed in a narrow (16:9) aspect
ratio.
Depending on the disc played, consult the following table when making settings.
¶ Some displays may show different setting names than those shown in the following table.
Resolution
(DVI Settings)
Aspect Ratio
(DVI Settings)
720 x 480 I/P
(720 x 576 I/P)
16 : 9 (Wide) / 16 : 9
(Compressed)
1280 x 720 P
1920 x 1080 I
720 x 480P
16 : 9 (Wide)
Direct
Squeeze recorded discs
Display setting
Full/Squeeze
(/Through Squeeze)
Normal*/Through
(/Dot-By-Dot)

[Video Memory]

Use to select the image quality of the DVI output.
Use the up/down cursor buttons (», «)
to select [Video Memory] and the right/
left cursor buttons (|, \) to select
image quality, then press the ENTER
button to confirm.
Resolution
Aspect Ratio
Video Memory
Image quality can be selected from the following:
Direct
¶ Image quality will be directly output as recorded on
the source software.
Natural
¶ The edges of the image are softened. Suitable for movie
playback.
Enhanced
¶ The color is enhanced and the edges of the image are
sharpened. Suitable for playback of computer graphics
(CG) images or animations.
Memory 1/Memory 2/Memory 3
¶ Allows selecting of image quality settings recorded in
Memory 1, 2 and 3 (settings can be made manually).
See page 52 for further information.
Important
¶ If a resolution setting is selected that is not supported by
your DVI display, the playback image may appear distorted,
or may not appear at all.
For details regarding resolutions supported by your DVI
display, consult the manufacturer of your DVI display.
Disc played
4:3 aspect ratio recorded discs
Aspect Ratio
(DVI Settings)
4 : 3/16 : 9
(Wide)
16 : 9
(Compressed)
* Some displays may be set as "Full/Squeeze".
This unit has been designed to allow connection
to a DVI device. Proper operation may not be pos-
sible when connected to some HDMI devices.
Initial Settings
04
720 x 480P
16 : 9 (Wide)
Direct
Display setting
Standard/Normal*/4 : 3/
Through (/Dot-By-Dot)
49

Publicité

Chapitres

Table des Matières
loading

Table des Matières