Pioneer DVD-V8000 Mode D'emploi page 68

07 Function for Commercial Use
4) With the cursor over [DIVIDE GROUP], press
the ENTER button.
Command Stack
Group(1-002) Command(1-001)
Group001 001 01:000901-001201
Group002 002
003
004
005
006
007
008
Move Select ENTER
¶ A new group will be formed, beginning from the se-
lected command.
¶ In order for the new group to be inserted immediately
after the group from which it was divided, a new group
number will be added to the following group.
Caution is needed when a setting is present that uses
[GO TO GROUP] to cause a jump to occur.
3.2 Merging Groups
Use this function to merge (join) one group with its immedi-
ately following contiguous group.
Example: To merge Group001 and Group002
1) Place the cursor over the blank space
following the final step in the first group's
command column, then press the ENTER
button.
Command Stack
Group(1-002) Command(1-001)
Group001 001 01:000301-000601
Group002 002
003
004
005
006
007
008
Move Select ENTER
2) Select [COMMAND], then press the ENTER
button.
Command Stack
Group(1-001) Command(0-001)
Group001 001
SEGMENT PLAY
Group002 002
CHAPTER PLAY
003
COMMAND
004
005
006
007
008
Move Select ENTER
68
Delete CLEAR Exit SETUP
Delete CLEAR Exit SETUP
Return RETURN Exit SETUP
3) Select [MERGE GROUP].
Command Stack
Group(1-002) Command(1-001)
Group001 001
PLAY
Group002 002
STEP REV
003
WAIT
004
REPEAT GROUP
005
GO TO GROUP
006 PASS THROUGH
PASS THROUGH KEY
007
DIVIDE GROUP
008
MERGE GROUP
Move Select ENTER
4) With the cursor over [MERGE GROUP], press
the ENTER button.
Command Stack
Group(1-001) Command(1-002)
Group001 001 01:000301-000601
002 01:000901-001201
003
004
005
006
007
008
Move Select ENTER
¶ The same thing can be performed without opening the
menu, by placing the cursor over the blank space and
pressing the CLEAR button.
¶ Since one group less will exist, if following groups ex-
ist, their group numbers will be decremented by one.
Caution is needed when a setting is present that uses
[GO TO GROUP] to cause a jump to occur.
3.3 Deleting commands
1) With the cursor on the command you wish to
delete, press the CLEAR button.
¶ The selected command will be deleted.
3.4 Deleting a group
Example: To delete Group002
1) With the cursor on the group you wish to
delete, press the ENTER button, then select
[DELETE GROUP].
Command Stack
Group(1-002) Command(1-001)
Group001 001 01:000901-001201
Group002 002
CREATE GROUP
003
DELETE GROUP
004
005
006
007
008
Move Select ENTER
PAUSE STOP
STEP FWD
000 sec.
000
Return RETURN Exit SETUP
Delete CLEAR Exit SETUP
Return RETURN Exit SETUP