Digital Audio Output Settings; [Digital Out]; [Dolby Digital Out]; [Dts Out] - Pioneer DVD-V8000 Mode D'emploi

04 Initial Settings

Digital audio output settings

1. Press the SETUP button to open the
SETUP menu, then use the cursor
buttons (», «, |, \) to select [Initial
Settings] and press the ENTER button
.
(page 39)
(Use the cursor buttons (», «, |, \) to
select [Digital Audio Out].)
Initial Settings
Digital Audio Out Digital Out
Video Output Dolby Digital Out
Language DTS Out
Display 96 kHz PCM Out
Options MPEG Out
2. Use the cursor buttons (», «, |, \) to
select and set a desired item, then press
the ENTER button to confirm the setting.

[Digital Out]

Use this setting to select whether the connected device
requires digital output.
Initial Settings
Digital Audio Out Digital Out
Video Output Dolby Digital Out
Language DTS Out
Display 96 kHz PCM Out
Options MPEG Out
On (Default)
Audio is output from the rear panel DIGITAL AUDIO OUT
connector.
Off
Audio is not output from the rear panel DIGITAL AUDIO
OUT connector.
40
On
Dolby Digital
Off
96 kHz > 48 kHz
MPEG Out > PCM
On
Off
*1
[Dolby Digital Out]
Use this setting to select whether or not a connected de-
vice is compatible with Dolby Digital audio.
Initial Settings
Digital Audio Out Digital Out
Video Output Dolby Digital Out
Language DTS Out
Display 96 kHz PCM Out
Options MPEG Out
Dolby Digital (Default)
Select this when connecting to an amplifier that supports
Dolby Digital or when connecting to a Dolby Digital de-
coder.
Dolby Digital > PCM
Dolby Digital signals are converted and output as linear
PCM signals. Select this when connecting to an amplifier
that does not support Dolby Digital.
*2
[DTS Out]
Use this setting to select whether or not a connected de-
vice supports DTS audio.
Initial Settings
Digital Audio Out Digital Out
Video Output Dolby Digital Out
Language DTS Out
Display 96 kHz PCM Out
Options MPEG Out
Off (Default)
Use this setting when connecting to an amplifier that does
not support DTS.
DTS
Use this setting when connecting to an amplifier that sup-
ports DTS or when connecting to a DTS decoder.
Important
¶ Selecting [DTS] when a non-DTS amplifier is connected
may result in the generation of noise.
¶ DTS sound is not output from the AUDIO OUT (analog
audio output) jacks.
*1 Manufactured under license from Dolby Laboratories. "Dolby" and
the double-D symbol are trademarks of Dolby Laboratories.
*2 "DTS" and "DTS Digital Out" are registered trademarks of Digital
Theater Systems, Inc.
Dolby Digital
Dolby Digital > PCM
Off
DTS