Editing Command Stack - Pioneer DVD-V8000 Mode D'emploi

2.3.5 PASS THROUGH KEY command
This command is used to enable/disable the PASS THROUGH
button on the DVD-V8000's front panel.
1) With the cursor over [PASS THROUGH KEY],
press the ENTER button.
Command Stack
Group(1-001) Command(0-000)
Group001 001
PLAY
002
STEP REV
003
WAIT
004
REPEAT GROUP
005
GO TO GROUP
006
PASS THROUGH
007 PASS THROUGH KEY
DIVIDE GROUP
008
MERGE GROUP
Move Select ENTER
¶ The switching window will be displayed.
Command Stack
Group(1-001) Command(0-000)
Group001 001
002
ENABLE
003
004
005
006
007
008
Move Select ENTER
2) Use the right/left arrow buttons (|, \) to
select either [ENABLE] or [DISABLE], then
press the ENTER button.
ENABLE: Main unit's PASS THROUGH button is enabled.
DISABLE: Main unit's PASS THROUGH button is disabled.
¶ Setting is completed.
¶ Select [CANCEL] then press the ENTER button to re-
turn to the command selection menu.
Note
¶ When power is first turned on, the PASS THROUGH but-
ton is enabled by default.
PAUSE STOP
STEP FWD
000 sec.
002
Return RETURN Exit SETUP
THROUGH OUT KEY
DISABLE
CANCEL
Return RETURN Exit SETUP
Function for Commercial Use

3. Editing Command Stack

3.1 Dividing into groups
Use this function to divide a group into two groups. The des-
ignated command and all following commands will form a
new group.
1) Place the cursor over the first command to be
separated from the existing group, then press
the ENTER button.
Command Stack
Group(1-001) Command(1-002)
Group001 001 01:000301-000601
002 01:000901-001201
003
004
005
006
007
008
Move Select ENTER
2) Select [COMMAND] and press the ENTER
button.
Command Stack
Group(1-001) Command(0-002)
Group001 001
SEGMENT PLAY
002
CHAPTER PLAY
003
COMMAND
004
005
006
007
008
Move Select ENTER
3) Select [DIVIDE GROUP].
Command Stack
Group(1-001) Command(1-002)
Group001 001
PLAY
002
STEP REV
003
WAIT
004
REPEAT GROUP
005
GO TO GROUP
006 PASS THROUGH
PASS THROUGH KEY
007
DIVIDE GROUP
008
MERGE GROUP
Move Select ENTER
07
Delete CLEAR Exit SETUP
Return RETURN Exit SETUP
PAUSE STOP
STEP FWD
000 sec.
000
Return RETURN Exit SETUP
67