Pioneer DVD-V8000 Mode D'emploi page 66

07 Function for Commercial Use
2.3.2 Setting wait time
Example: Setting a wait time of 5 seconds
1) With the cursor over [WAIT], press numeral
button [5], followed by the ENTER button.
¶ Setting is completed.
Command Stack
Group(1-001) Command(0-000)
Group001 001
PLAY
002
STEP REV
003
WAIT
004
REPEAT GROUP
005
GO TO GROUP
006
PASS THROUGH
007 PASS THROUGH KEY
DIVIDE GROUP
008
MERGE GROUP
Move Select ENTER
2.3.3 GO TO command
Example: to jump to a different command group (Group
2)
1) With the cursor over [GO TO GROUP], press
numeral button [2], followed by the ENTER or
« button.
¶ Setting is completed.
¶ A non-existing group value can also be entered (in this
case, no jump is executed).
¶ Since no more than 150 groups can be created, group
values above 150 cannot be input.
Command Stack
Group(1-001) Command(0-000)
Group001 001
PLAY
002
STEP REV
003
WAIT
004
REPEAT GROUP
005
GO TO GROUP
006 PASS THROUGH
PASS THROUGH KEY
007
DIVIDE GROUP
008
MERGE GROUP
Move Select ENTER
2.3.4 PASS THROUGH command
Use to switch output between main unit video/audio and ex-
ternal input video/audio.
1) With the cursor over [PASS THROUGH], press
the ENTER button.
Command Stack
Group(1-001) Command(0-000)
Group001 001
PLAY
002
STEP REV
003
WAIT
004
REPEAT GROUP
005
GO TO GROUP
006 PASS THROUGH
PASS THROUGH KEY
007
DIVIDE GROUP
008
MERGE GROUP
Move Select ENTER
66
PAUSE STOP
STEP FWD
005 sec.
000
Return RETURN Exit SETUP
PAUSE STOP
STEP FWD
000 sec.
002
Return RETURN Exit SETUP
PAUSE STOP
STEP FWD
000 sec.
002
Return RETURN Exit SETUP
2) Use the up/down arrow buttons (», «) to
select [MONITOR], then use the right/left
arrow buttons (|, \) to select [DVD],
[EXTERNAL] or [PRESERVE].
DVD: Switches output to video playback from main unit.
EXTERNAL: Switches output to through output.
PRESERVE: Output is not switched.
Command Stack
Group(1-001) Command(0-000)
Group001 001
MONITOR
002
VIDEO
003
AUDIO
004
005
006
007
008
Move Select ENTER
3) Use the up/down arrow buttons (», «) to
select [VIDEO], then use the right/left arrow
buttons (|, \) to select [DVD], [EXTERNAL]
or [PRESERVE].
4) Use the up/down arrow buttons (», «) to
select [AUDIO], then use the right/left arrow
buttons (|, \) to select [DVD], [EXTERNAL]
or [PRESERVE].
5) With the cursor over [OK], press the ENTER
button.
¶ Setting is completed.
¶ If [CANCEL] is selected followed by ENTER, the dis-
play returns to the command selection menu screen.
DVD
DVD
DVD
OK CANCEL
Return RETURN Exit SETUP