Extend Terminal Settings - Pioneer DVD-V8000 Mode D'emploi

6. EXTEND TERMINAL settings

For details regarding EXTEND TERMINAL settings, see "Ex-
tend Terminal Specifications" (page 89).
1. Hold the SETUP button depressed for 1
second to display the ADV. SETUP menu.
2. Use the », « cursor buttons to select
[EXTEND TERMINAL].
3. Use the |, \ cursor buttons to select
[User], then press the ENTER button.
Extend Terminal Settings
Current New
1.
2.
3.
4.
5. ENTER
6. GROUP 1
7. GROUP 2
8. GROUP 3
Move Select ENTER
¶ [Current] indicates present settings, listed from 1 to
30.
¶ To return from this window to the ADV. SETUP menu,
press the RETURN button, and to completely exit the
setting menu, press the SETUP button.
¶ Switch combinations (30 patterns) whose functions can
be changed include the following:
Cursor
(8 keys)
Operations
PLAY, STOP, PAUSE, STEP FWD, STEP REV, SCAN FWD,
SCAN REV, SKIP FWD, SKIP REV, ENTER, MENU, TOP
MENU, RETURN, DISPLAY, AUDIO, ANGLE, SUBTITLE, RE-
PEAT, REPEAT A-B, CLEAR, OPEN/CLOSE, SETUP,
MEMORY, RECALL, TT/CH/FR/TM (25 keys)
Numbers
1 to 20, 0, and >10 (22 keys)
Advanced Setup Menu (Settings for Commercial Use)
PLAY
STOP
PAUSE
STEP FWD
STEP REV
SCAN FWD
SCAN REV
SKIP FWD
Delete CLEAR Exit SETUP
Command Stack
GROUP 1 to GROUP 27 (27 keys)
Extend Terminal Settings
Current New
1.
2.
3.
4.
5. ENTER
6. GROUP 1
7. GROUP 2
8. GROUP 3
Move Select ENTER
Use the cursor buttons (», «, |, \) to select the desired
button, then press the ENTER button to confirm the selec-
tion; the display will change in the [Current] column.
¶ It is also possible to assign the same function to multiple
switch patterns if desired.
Disabling Switch Operations
In addition to assigning a new function to a default button, it
is also possible to merely disable the button operation if de-
sired.
¶ Select the button you wish to disable from the [Current]
list, then press the CLEAR button. The display will change
to show [nothing] as the function.
¶ In the following example, the no. 1 button has been disa-
bled (no function assigned). As a result, pressing the but-
ton will produce no response.
Extend Terminal Settings
Current New
1. nothing
2.
3.
4.
5. ENTER
6. GROUP 1
7. GROUP 2
8. GROUP 3
Move Select ENTER
Resetting Default Values
Press the ENTER button at the [Default Setting] item of the
[Current] menu to reset all buttons to their default functions.
Extend Terminal Settings
Current New
25. STOP
26. PAUSE
27. TOP MENU
28. 7
29. 8
30. 9
Default Setting
Move Select ENTER
06
PLAY
STOP
PAUSE
STEP FWD
STEP REV
SCAN FWD
SCAN REV
SKIP FWD
Exit SETUP
PLAY
STOP
PAUSE
STEP FWD
STEP REV
SCAN FWD
SCAN REV
SKIP FWD
Delete CLEAR Exit SETUP
PLAY
STOP
PAUSE
STEP FWD
STEP REV
SCAN FWD
SCAN REV
SKIP FWD
Exit SETUP
63