Displaying Disc Information; Monitor Out Functions - Pioneer DVD-V8000 Mode D'emploi

02 Controls and Displays

Displaying disc information

Press the DISPLAY button during disc playback to display
the track, chapter and title information of the disc, as well as
video transmission rate when playing DVD discs.
Disc information is displayed at the top of the screen. Press
the DISPLAY button again to change the contents of the dis-
played information.
During DVD playback
3
Play DVD
Current / Total
Title 1/3
Frame
1 English
Audio Dolby Digital
3
Play DVD
Current / Total
Chapter 2/36
Frame
# Tr. Rate :
During DVD-Video playback, the # mark displayed
with some DVD-Video discs indicates that the
video is playing in 24 fps (frames-per-second) pro-
gressive scan mode.
Still DVD
Current / Total
Title 1/1
Frame
1 English
Audio
During VR format DVD-RW playback
3
Play DVD-RW
Current / Total
Title 1/32
1
Audio Dolby Digital
3
Play DVD-RW
Current / Total
Chapter 1/1
Tr. Rate
During Video CD playback
3
Play VCD
Current / Total
Track 2/16
3
Play VCD
Disc
During music CD playback
Play CD
Current / Total
Track 2/16
Play CD
Disc
Note
¶ If display setting [On Screen Display] is set to [Off], disc
information will not be displayed even if the DISPLAY but-
ton is pressed (see page 45).
This product includes FontAvenue® fonts licenced by NEC Corporation.
FontAvenue is a registered trademark of NEC Corporation.
26
Elapsed Remain Total
2.23 138.36 138.59
4295 250470
1 English
3/2.1CH Subtitle Angle
Elapsed Total
Remain
0.06 1.40 1.46
196 3180
6.0Mbps
Elapsed Remain Total
0. 05 00 19. 55 20. 00
151 36000
- -
Subtitle Angle
Original
Elapsed Remain Total
0.08 30.22 30.30
- -
2/0CH Subtitle
Original
4.3Mbps
Elapsed Remain Total
0.23 4.20 4.43
Elapsed Remain Total
0.23 58.51 57.14
Elapsed Remain Total
1.07 4.40 5.47
Elapsed Remain Total
28.00 30.20 58.20

Monitor out functions

7 Monitor OSD (On Screen Display)
The disc information listed on page 26 is superimposed on all
image outputs. However the DVD-V8000 is also equipped
with a composite video output connector for the connection
of a data monitor in addition to the normal video output, thus
allowing disc information to be superimposed on the monitor
video output signals alone if desired.
For purposes of this player, the disc information displayed
only on the data monitor is called "Monitor OSD".
(See page 83 for connection instructions.)
The ADV. SETUP menu allows the "Monitor OSD" to be
set for display at the top of the screen, bottom of screen, or
1
for display OFF. The default is for the Monitor OSD to be
displayed at the bottom of the screen (page 56).
7 Monitor OSD display contents
During normal playback (DVD Video)
1
1 Current title/Total number of titles, Current frame,
Total frames
2 Remaining time to current title end
Elapsed time from current title start
Current title total playing time
3 Current chapter/Total chapters in all titles
4 Remaining time to current chapter end
Elapsed time from current chapter start
Current chapter total playing time
During normal playback (VR formatted
DVD-RW)
1 Current title/Total number of titles
2 Remaining time to current title end
Elapsed time from current title start
Current title total playing time
3 Current chapter/Total chapters in all titles