Advanced Setup Menu; (Settings For Commercial Use); Advanced Setup Menu (Settings For Commercial Use); To Access The Adv. Setup Menu - Pioneer DVD-V8000 Mode D'emploi

06

Advanced Setup Menu (Settings for Commercial Use)

Advanced Setup Menu

(Settings for Commercial Use)

In addition to the normal SETUP menu, DVD-V8000 includes
an ADV. SETUP menu for selecting the following 27 special
functions:
(1) COMMAND STACK
(2) WEEKLY TIMER
(3) POWER ON START
(4) TITLE PLAY MODE
(5) KEY LOCK
(6) REPEAT MODE
(7) SERIAL PORT
(8) BAUD RATE
(9) REV STEP/REV PLAY
(10) BLACKBOARD LOCK
(11) PLAYER CONTROL PANEL
(12) SETUP LOCK (MOUSE)
(13) GOTO DVD-MENU
(14) MOUSE CURSOR
(15) EXTEND TERMINAL
(16) SYNC OUT(DURING SQ)
(17) EXTERNAL SYNC
(18) MONITOR OSD
(19) AUTO PASS THROUGH
(20) PLAY START MODE
(21) LOAD SETUP incl WEEKLY TIMER
(22) SAVE SETUP incl WEEKLY TIMER
(23) LOAD COMMAND STACK
(24) SAVE COMMAND STACK
(25) LOAD WEEKLY TIMER
(26) SAVE WEEKLY TIMER
(27) SAVE ERROR LOG
LOAD SETUP incl WEEKLY TIMER
SAVE SETUP incl WEEKLY TIMER
LOAD WEEKLY TIMER
SAVE WEEKLY TIMER
54

1. To access the ADV. SETUP menu

Press and hold the SETUP button (on remote control unit or
main unit) depressed for one second. The screen displays
the Advanced Setup (ADV. SETUP) menu as shown in the
illustration.
When the cursor is placed on [COMMAND STACK] and the
ENTER button pressed, Command Stack entry menu appears.
For [WEEKLY TIMER], [POWER ON START], and [KEY
LOCK], use the cursor buttons (|, \) to alternate between
[ON/OFF]; when [ON] is selected and the ENTER button is
pressed, the next menu will allow detailed settings.
For [EXTEND TERMINAL], use the cursor buttons (|, \) to
select [Standard/User]. When [User] is selected, pressing
the ENTER button will allow settings to be entered at the
next menu.
For other items, use the up/down cursor buttons (», «) on
this menu page to select the item, then use the left/right cur-
sor buttons (|, \) to select the [ON/OFF] or other value.
Note
¶ ADV. SETUP menu items can be set using the mouse as
well as the remote control unit. Place the mouse cursor
over the item you wish to set and click the left mouse but-
ton to select the item. Clicking on the page number at the
upper right of the display screen will change the page be-
ing displayed. When an item is selected, clicking the left or
right mouse button will allow the item's value to be changed.
¶ When the [WEEKLY TIMER], [POWER ON START], or
[KEY LOCK] menu items are set to [ON], and the left
mouse button is clicked, a menu will appear allowing de-
tailed values for each item to be changed.
¶ On the [EXTEND TERMINAL] menu, when [User] is se-
lected and the left mouse button is clicked, a menu will
appear allowing detailed values to be changed.