Removing The Unit From The Packing - EURAPO Sigma Manuel D'utilisation Et Installation

110-328, 110-218
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

a minimum distance between ceiling and false ceiling of at least 445 mm and between
the sides of the fan coil and possible adjacent objects of at least 200 mm (see Fig. 2 for
concealed model and with casing model);
a power supply to the condensate pump which is totally independent from the normal
activity of the unit (unit ON or OFF);
a correct water discharge of the condensing water coming out of the unit.
Fig. 2 Service openings for concealed model and with casing model (top and side view).
DANGER
Before proceeding with any
operation of installation and/or
maintenance, make sure that the
unit has been disconnected from
the power supply

6.2 REMOVING THE UNIT FROM THE PACKING

When you open the shipping carton, check to make sure all the components are present
and in good condition. Any damage must be immediately communicated to the transport
agent, and our service department must be notified immediately if any material is missing.
MODELS WITH CASING
Open the box at the bottom side, grasp the fan coil by
the edge of the casing together with the plastic bag and
pull the unit out of the box.
CONCEALED MODELS
Open the box at the top, grasp the fan coil by the flange
on the delivery outlet and pull the unit out.
(Fig. 3).
A
B
Mod.
Size
CH-SH
110÷218
230
85
220÷328
CV-SV
260
Fig. 3
EN
C
D
E
mm
215
200
200
245
1
2
3
4
5
6
7
8
9
10
+
29

Publicité

Table des Matières
loading

Table des Matières