Removing The Unit From The Packing - EURAPO ESTSV Série Manuel D'utilisation Et Installation

Fig. 2 Service openings for ESTCH model (Top and side view).
Before proceeding with any
operation
and/or maintenance, make
sure that the unit has been
disconnected from the power
supply (Fig. 3).

6.2 REMOVING THE UNIT FROM THE PACKING

When you open the shipping carton, check to make sure all the components are present
and in good condition. Any damage must be immediately communicated to the transport
agent, and our service department must be notified immediately if any material is missing.
MODELS WITH CASING
Open the box at the bottom side, grasp the fancoil by
the edge of the casing together with the plastic bag and
pull the unit out of the box.
CONCEALED MODELS
Open the box at the top, grasp the fancoil by the flange
on the delivery outlet and pull the unit out.
It is advisable to keep the unit in the carton box prior to installation, to protect it
from damages. The plastic bags can be used to protect the inner frame from the
moment it is installed until the mounting of the casing.
of installation
A B
Mod. Size
ESTCH 512÷516 230
85
520÷528 260
Fig. 3
C D E
mm
215
200 200
245
EN
1
2
3
4
5
6
7
8
9
10
+
27