Description Of The Est Fancoil Units; Components; Technical Specifications - EURAPO ESTSV Série Manuel D'utilisation Et Installation

4. DESCRIPTION OF THE EST FANCOIL UNITS

1
The EST fancoils are units for heating and cooling application (excluding ESTPH and ESTPH/
AF models, which can be used for heating only); they are fed with hot and cold water and
2
used according to their respective performances features.
fancoil units are components of the heating and/or cooling systems, consequently, they
are without any safety devices on the water circuit. These units have been designed for
3
temperature until 85 °C. When you want to connect the fancoil to a condensing unit in
cooling mode, it must be ordered with a direct-expansion coil (optional upon request).
The EST fancoils can be installed on wall, on floor (with optional feet) or concealed.
4
TYPE OF INSTALLATION
Model
5
6

4.1 COMPONENTS

7
For identifying the components of the EST fancoil you have purchased (basic unit), see the
exploded drawings on Enclosure 1/A ÷ 1/C of this manual.
Enclosure 4 (Fig.1) shows the ESTCBL00, standard electric panel.
8
Enclosure 2 shows the possible configurations of installation.
9

4.2 TECHNICAL SPECIFICATIONS

The technical data directly referred to the unit purchased are shown on the identification
10
tag (fig. 1) located at the internal side of the machine. Technical specifications (standard)
concerning installation and use of fancoil units are listed on Enclosure 3 of this manual.
+
24
ON WALL
ESTSV, ESTSV/AF,
ESTPV, ESTPV/AF,
ESTSVR
Fig. 1 Label on fancoil
ON CEILING
ESTSH, ESTSH/AF,
ESTPH, ESTPH/AF
CONCEALED
ESTCV, ESTCV/AF,
ESTCH, ESTCH/AF,
ESTCVR