MODEL
1
SV, SV/AF
2
SH, SH/AF
CV, CV/AF
CH, CH/AF
3
PV, PV/AF
4
PH, PH/AF
SVR
CVR
5
4. DESCRIPTION OF THE FAN COIL UNITS
6
The EURAPO fan coils are units for heating and cooling application (excluding PH and PH/
AF models, which can be used for heating only); they are fed with hot and cold water and
7
used according to their respective performances features.
Fan coil units are components of the heating and/or cooling systems, consequently, they
are without any safety devices on the water circuit. These units have been designed for
8
temperature until 85 °C. The fan coils can be installed on wall, on floor (with optional feet)
or concealed.
TYPE OF INSTALLATION
9
Model
10
4.1 COMPONENTS
+
For identifying the components of the fancoil you have purchased (basic unit), see the exploded
drawings on Enclosure 1/A ÷ 1/C of this manual.
Enclosure 4 (Fig.1) shows the CBL00, standard electric panel.
Enclosure 2 shows the possible configurations of installation.
4.2 TECHNICAL SPECIFICATIONS
The technical data directly referred to the unit purchased are shown on the identification
tag located at the internal side of the machine (Fig.1). Technical specifications (standard)
concerning installation and use of fan coil units are listed on the Enclosures 3 of this manual.
26
INSTALLATION
ON THE WALL/ON THE FLOOR
(WITH MOUNTING FEET)
HORIZONTAL
CONCEALED VERTICAL
CONCEALED HORIZONTAL
ON THE WALL/ ON THE FLOOR
(WITH MOUNTING FEET)
HORIZONTAL
ON THE WALL/ON THE FLOOR
VERTICAL CONCEALED
ON WALL
SV, SV/AF, PV,
PV/AF, SVR
SIZE
110÷328
110÷328
110÷328
110÷328
110÷218
110÷218
110÷218
110÷218
ON CEILING
SH, SH/AF, PH,
PH/AF
CONCEALED
CV, CV/AF, CH,
CH/AF, CVR