TEFAL CLIPSO Modulo 2 Guide De L'utilisateur page 14

Masquer les pouces Voir aussi pour CLIPSO Modulo 2:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EXE_IFU_TE_MODULO-2_4136751_mise en page 06/12/11 17:30 Page12
TEFAL answers your questions
Problems
If you cannot close
the lid:
If
the
pressure
cooker has heated
up under pressure
with
no
inside:
If
the
pressure
indicator did not
rise and nothing
escapes from the
valve
during
cooking:
If
the
pressure
indicator has risen
but still nothing
escapes from the
valve
during
cooking:
12
All manuals and user guides at all-guides.com
Check that the Open knob (E) is pressed down.
Check the way the seal is fitted, see the "Cleaning and
Maintenance" heading.
Have your pressure cooker inspected by a TEFAL Ap-
proved Service Centre.
liquid
This is normal for the first few minutes.
If the problem persists, check that:
- The heat source is high enough, if not, increase it.
- The amount of liquid in the pressure cooker is suffi-
cient.
- The operating valve is in position
- Your pressure cooker is properly closed.
- The seal and the pressure cooker edge have not been
damaged.
- The seal is properly fitted, see the "Cleaning and Main-
tenance" heading.
This is normal for the first few minutes.
If the phenomena persists, place your appliance under
a stream of cold water until the pressure presence in-
dicator drops down.
Clean the operating valve
- fig 16
lease conduit
flap moves without difficulty
Recommendations
1
or
- fig 15
and the steam re-
and check that the safety valve
- fig 17
.
2
.

Publicité

Table des Matières
loading

Table des Matières