Lubrication - Enodis Cleveland MKDL-40-T Manuel De L'opérateur

Marmites malaxeuses à vapeur directe
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

LUBRICATION

Lubricate the following parts every three months to insure
smooth operation and reduce wear.
MIXER BRIDGE HOUSING
There are two grease nipples on the mixer bridge swivel
housing which are accessed by removing the front and back
covers on the 18" console.
TRUNNION HOUSING, WORM SCREW AND TILT GEAR
These parts are accessed through the front cover on the 18"
console.
Apply grease to gear teeth. Check for excessive play and
adjust with adjusting screw located on top of cross bar.
KETTLE TRUNNIONS Accessed via the top covers on the
10" and 18" consoles. Each has two grease nipples.

Publicité

Table des Matières
loading

Produits Connexes pour Enodis Cleveland MKDL-40-T

Table des Matières