Preparing The Measurement; Battery Disposal - Beurer BC 30 Mode D'emploi

Information on the display:
1. Time and date
2. Systolic pressure
3. Risk indicator
4. Diastolic pressure
5. Cardiac arrhythmia symbol
6. Calculated pulse value
7. Pulse symbol
8. Pump up, release air (arrow)
9. User memory /
10. Unit in mmHg
11. Average value of the last three measurements
12. Battery level indicator
13. Memory space number
1
13
12
11
10
9
8
7 6 5
All manuals and user guides at all-guides.com
2
3
4

4. Preparing the measurement

Insert the batteries
• Remove the batte-
ry compartment lid
on the left side of
the device.
• Insert two 1.5 V
AAA (alkaline type LR03) batteries.
• Make sure that the batteries are inserted the correct
way round. Do not use rechargeable batteries.
• Close the battery compartment lid again carefully.
If the battery change symbol is flashing and
pears, no more measurements are possible and you must
replace all batteries.
After inserting the batteries, the year appears on the
display and you can then set the date and time.

Battery disposal

• The empty, completely flat batteries must be disposed
of through specially designated collection boxes, re-
cycling points or electronics retailers. You are legally
required to dispose of the batteries.
23
ap-