Preparing The Measurement - Beurer BM 28 Mode D'emploi

Information on the display:
12
11
10
9
8 7 6 5
1. Time and date
2. Systolic pressure
3. Diastolic pressure
4. Calculated pulse value
5. Cardiac arrhythmia symbol
6. Release air
7. Memory display: average value ( ), morning (
evening ( ), memory space number
8. Battery replacement symbol
9. Alarm function
10. Risk indicator
11. User memory
12. Cuff position control
1
2
3
4
pulse symbol
),

4. Preparing the measurement

Inserting the batteries
• Open the battery compartment lid.
• Insert four 1.5V AA (alkaline type
LR6) batteries. Make sure that the
batteries are inserted the correct
way round.
Do not use rechargeable batteries.
• Close the battery compartment lid
again carefully.
• All display elements are briefly dis-
played, 24 h flashes in the display.
Now set the date and time as de-
scribed below.
If the low battery indicator
you can no longer perform any measurements and must re-
place the batteries. Once the batteries have been removed
from the device, the time must be set again.
Battery disposal
• The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
22
is permanently displayed,