Selecting Memory - Beurer BC 30 Mode D'emploi

Blood pressure may vary between the right and left wrist,
which may mean that the measured blood pressure val-
ues are different. Always perform the measurement on
the same wrist.
If the values between the two wrists are significantly dif-
ferent, please consult your doctor to determine which
wrist should be used for the measurement.
Adopt the correct posture
• Before every measurement, relax for about five minu-
tes. Otherwise deviations can occur.
• You can perform the measure-
ment while sitting or lying. To car-
ry out a blood pressure measure-
ment, make sure you are sitting
comfortably with your arms and
back leaning on something. Do
not cross your legs. Place your
feet flat on the ground. Make sure to rest your arm and
move it. Always make sure that the cuff is at heart le-
vel. Otherwise significant deviations can occur. Relax
your arm and the palm of your hand.
• To avoid falsifying the measurement, it is important to
remain still during the measurement and not to speak!
All manuals and user guides at all-guides.com

Selecting memory

Press the
user memory. Select the desired user memory by press-
ing the user selection button
with the
You have 2 memories with 60 memory spaces each to
store the measurements of 2 different people separate-
ly or to separate measurements taken in the morning
and at night.
Performing the blood pressure measurement
• As described above, attach the cuff and adopt the
• Select the user memory
• Then the pressure in the cuff is slowly released and
• When the measurement has been taken, the remai-
25
button to display the date/time and current
button.
posture in which you want to perform the measure-
ment.
ment by holding the
check, during which all numbers appear, the cuff in-
flates automatically. Whilst the cuff is pumping up, the
device already calculates measurements for estimating
the necessary pump pressure. If this pressure is insuf-
ficient, the device automatically pumps more pressure.
the pulse is detected.
ning air pressure dissipates very quickly. The pulse,
the systolic and diastolic blood pressure are displayed.
. Confirm your selection
or . Start the measure-
button. Following the display