Safety Tests; Safety Checks - WEPA TOPITEC AUTOMATIC Mode D'emploi

3.5 Safety tests

performed at the factory by the device manufacturer
1. Risk analysis based on Machinery Directive 2006/42/EC
(Annex I) and DIN EN ISO 12100:2011.
2. Sound pressure measurement (no report required, as LPA < 70 dB(A))
according to Machinery Directive, Annex I
3. Inspection and testing according to DIN EN 61010-1: 2011 2011

3.6 Safety checks

The safety tests and checks of the TOPITEC
manufacturer at the factory. All relevant procedures and results have been documented.
The device owner is obliged to carry out repeat safety checks and tests according to DGUV A3.
AUTOMATIC have been performed by the
®
21