WEPA TOPITEC AUTOMATIC Mode D'emploi page 100

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 134
The control of the TOPITEC
bols and button functions. Do not apply force when touching the surface. If the keypad buttons are
touched with an implement, the keypad might become dirty or damaged.
6.5 Operating modes and control
6.5.1 Manual mode for cleaning
Activate the manual slide function to clean the TOPITEC
in any direction you wish with the arrows.
6.5.2 Automatic mode
Automatic mode is the standard mode for production. Enter the formulation and start the process.
Once the stirring process is complete and following subsequent manual unlocking of the tool shaft,
it is possible to move the slide back to its home position via the "Arrow down" button.
6.5.3 Switching on the mixing system
Connect the TOPITEC
to a properly earthed power socket. Connect the power switch.
6.5.4 Operation
6.5.5 Switching off the mixing system
• After the mixing process is completed, remove the mixing jar from the holder.
• Switch off the main switch.
• Clean the TOPITEC
• Switch off the power switch and disconnect the power plug from the socket
if the device is not required.
6.5.6 Restarting mixing system after error or fault
If the mixing system has been affected by a fault or error, first have the problem eliminated
by a specialist technician. After a thorough inspection of the device, restart it.
6.5.7 Restarting after power failure
When the power returns, move the mixing system by hand to its initial position and check it.
If everything is OK, set the device to automatic mode.
34
TOPITEC
®
AUTOMATIC User Manual | 12-2020
®
AUTOMATIC mixing system occurs via a keypad in the form of sym-
Note
Before starting production, ensure that there are no objects
(e.g. tools, residual material, etc.) on or near the
TOPITEC
AUTOMATIC.
®
AUTOMATIC with the supplied power cable
®
Warning
• Before starting the device, check the power cable and the main switch
for proper connection/functioning.
• Switch on the main switch. The device starts up.
• The TOPITEC
®
AUTOMATIC mixing system is controlled through the keypad.
Warning
When in operation, the device must be constantly supervised.
AUTOMATIC and its accessories.
®
AUTOMATIC. You can now move the slides
®

Publicité

Table des Matières
loading

Table des Matières