WEPA TOPITEC AUTOMATIC Mode D'emploi page 110

M I XI N G MO DE /
R E P R OD U C IB LE PR E PARAT ION S ET- UP
5.
6.
7. Using the
+
(here: 1:30 min.; 2500 rpm). Confirm the rpm entry with
the preparation is saved in the TOPITEC
You can now start production by pressing
in the system or press
Preparations can consist of one, two or three steps. To configure a preparation with two steps,
follow the instructions above and confirm your entries by pressing
second "rpm" value.
44
TOPITEC ® AUTOMATIC User Manual | 12-2020
5. You are now ready to enter the second
step of preparation. Repeat the above steps
(here, 2:00 min.; 1500 rpm; 2:30 pause
"pause" flashes.
6. Confirm with the
to enter the settings for step 3 of the preparation.
"min." flashes.
and button, enter the relevant values for time and speed
Set
to return to the TOPITEC
Stop
button. You are now ready
Set
. In our example
Set
AUTOMATIC system under "prep. no. 10".
®
(TOPITEC jar in place?), set other preparations
®
I/0
AUTOMATIC default settings.
®
twice after entry of the
Set