WEPA TOPITEC AUTOMATIC Mode D'emploi page 105

M I X I NG MODE /
P R E PA R ATIO N S E TUP (O NCE-O FF)
4a.
4b.
5.
4a. After completion of the mixing process, message
"Process terminated" is displayed.
4b. After approx. 10 seconds, an acoustic signal is generated,
and the display changes to "Release tool shaft".
5. Using one hand, lift the safety bracket to the stop, pulling
the lock ring of the shaft sleeve upwards. With the second
hand, press the
The slide returns to its initial position. Release the two locking
handles at the sides and pull the locking device upwards. The
TOPITEC jar can now be removed from the device!
®
button.
39