WEPA TOPITEC AUTOMATIC Mode D'emploi page 103

Define single-step or two-step preparations
(max. 3 programming steps) M: to 200g
Set
Press + 1x: "Prep. no." flashes
+/–
Select "Prep. no." (e.g. 1) with +/–
Set
Press Set 1x: "M: to 200 g" flashes
Press Set Set 1x: "Min" flashes
+/–
Set "min." with +/–
Press Set Set 1x: "rpm" flashes
+/– +/–
Set "rpm" with
Set Set
Press 1x: "pause" flashes
+/–
Set "pause" with : "Min" flashes OR
Set
press to skip "pause": "min." flashes
Two-step preparations
+/–
Set "min." with +/–
Set Set
Press 1x: "rpm" flashes
+/–
Set "rpm" with +/–
Press Set Set 1x: "pause" flashes
+/–
Set "pause" with : "Min" flashes OR
Set
press to skip "pause": "Min" flashes
Set
Set
Press 1x: "Prep. no." (e.g. 1/2) flashes
I/0 I/0
Press 1x to start process
Slide moves up & tool shaft engages.
Program time countdown begins.
"Program terminated"
"Release tool shaft"
"Move slide"
Lift safety bracket and keep it in the upwards posi-
tion, release tool shaft from shaft retainer, pressing
the button down until the slide has moved
downwards with the jar clamped in place.
Stop
Press Stop 1x: Default settings
Three-step preparations
+/–
Set "min." with +/–
Set Set
Press 1x: "rpm" flashes
+/–
Set "rpm" with +/–
Press Set Set 1x: "pause" flashes
+/–
Set "pause" with : "Min" flashes OR
Set
press to skip "pause": "Min" flashes
+/–
Set "min." with +/–
Set Set
Press 1x: "rpm" flashes
+/–
Set "rpm" with +/–
Set
Set
Press 1x: "Prep. no." (e.g. 1/3) flashes
I/0 I/0
Press 1x to start process
Slide moves up & tool shaft engages.
Program time countdown begins.
"Program terminated"
"Release tool shaft"
"Move slide"
Lift safety bracket and keep it in the upwards posi-
tion, release tool shaft from shaft retainer, pressing
the button down until the slide has moved
downwards with the jar clamped in place.
Stop
Press Stop 1x: Default settings
37