WEPA TOPITEC AUTOMATIC Mode D'emploi page 121

Protect the device against mechanical impact!
Do not drop the device or any of its accessories. When moving the device on
the worktop, ensure that noelectronic or mechanical components are damaged.
Protect the device against dust!
Install and store the system and its accessories in a dust-free environment,
as fine particles could damage moving parts!
Protect the device against high temperature!
Do not install or store the system or its accessories in a room where they are exposed to
high temperatures. High temperature could damage electronic components, or lead to the
deformation or melting of certain plastic parts.
Protect the device against extreme temperature changes!
Do not install or store the system or its accessories in a room where they are exposed to very
low temperatures. As, during operation, the device is heated to operating temperature, there is
a risk of condensation inside the housing, which could damage electronic components.
Note
The average service life of the TOPITEC
is 10 years. After this time has elapsed, the device must undergo
a complete service by a specialist workshop.
Proper shut-down procedure:
Danger
Before carrying out any cleaning, maintenance or repair task, shut down the
device, following the proper shut-down procedure (see chapter 4.5)!
AUTOMATIC
®
55