Service Reminder (Pop Up); Accessories; Mattress - wissner-bosserhoff sentida 7-i Notice D'utilisation

6.12 Service reminder (pop up)

Service due on
xx.xx.xxxx
OK
If you do not wish to get a service reminder, you can have it deactivated in the Ca-
reBoard
®

7. Accessories

7.1 Mattress

The bed is equipped with a mattress. If necessary, this mattress can be replaced by the same
or a similar product.
Caution!
Do not use water mattresses. If the safe working load is exceeded, the drives and
other components may fail and cause accidents. Never exceed the safe working
load of 250 kg.
Caution!
Only replace wissner-bosserhoff mattresses with equivalent mattresses of the
same dimensions. Make sure that only mattresses with incisions on the underside
that allow for movement are used, as a mattress without these could affect the
adjustment functions. Do not use spring mattresses.
We recommend to use mattresses manufactured with a minimum volume weight of 40 kg/
m³ (RG 40). All wissner-bosserhoff standard mattresses fulfill this requirement. Please refer
to the following overview for the suitable mattress dimensions for the corresponding patient
surfaces.
Patient surface type
Aero / Easyclean
Comfort
96
by a service engineer.
Dimensions
12-18 cm × 87 cm × 200 cm
12-15 cm × 87 cm × 200 cm
The CareBoard reminds the user of the ser-
®
vice date two weeks before it is due. This
message is displayed until it is actively ack-
nowledged by pressing „OK". On the service
date, the message „Service overdue" is dis-
played, which also has to be acknowledged
by pressing „OK".