Foldable Linen Holder - wissner-bosserhoff sentida 7-i Notice D'utilisation

Le lit de soins digital
Masquer les pouces Voir aussi pour sentida 7-i:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 118
Danger!
!
If you fail to close the foot-end gap resulting from the patient surface extension with
a protector, there is danger of entrapment! This applies to both the temporary and
the permanent patient surface extension.
If you want to extend the patient surface of the low nursing bed sentida 7-i:
▪ Pull the yellow rope at the inner side of the foot end slightly upwards.
The foot end is now unlocked.
▪ Pull on the foot end until you hear a clicking sound at the desired position with the rope being
loose.
In order to shorten the low nursing bed sentida 7-i again, just follow the steps in reverse order:
▪ Unlock the foot end by pulling the yellow rope and push it back in.ein.

7.5 Foldable linen holder

At the outer side of the foot end, a linen holder can be attached as accessory. The linen hold-
er is connected to the foot end with a folding hinge. It serves for temporarily putting linen or
other objects down during the nursing care process. Assembly instructions are available from
wissner-bosserhoff for later extension.
▪ To open the linen holder, grab it at the top, pull it upwards and flap it down.
▪ To close the linen holder, fold it upwards and lower it in the folding hinge.
Attention!
With moving accessories, there is a risk of entrapment. Move the accessories
carefully in order to avoid squeezing.
Do not load the linen holder with more than 15 kg.
Please note that the linen holder cannot be used simultaneously to the
CareBoard
100
1
being attached at the food end of the bed.
®
2

Publicité

Table des Matières
loading

Produits Connexes pour wissner-bosserhoff sentida 7-i

Table des Matières