Technical Data - wissner-bosserhoff sentida 7-i Notice D'utilisation

12. Technical data

Outer dimensions
Nominal dimensions of patient surface
Height adjustment
Backrest adjustment
Thigh rest adjustment
Tilting
Safe working load
Bed weight
Type of protection
Protection class
Operating time
Power cable
Noise level, maximum
Application environment
Relative humidity
Atmospheric pressure
Environment temperature
Product life
Manufacturer
* Manufacturer's recommendation: the maximum resident weight may be able to be increased, de-
pending on the weight of the mattress and accessories used. For example: safe working load 250 kg
- mattress 10 kg - accessories 10 kg = max. resident weight 230 kg. When using heavier mattresses/
accessories, the max. permissible resident weight changes accordingly!
112
approx. 208 x 106 cm (depending on the wooden
lining)
90 cm × 200 cm
27.5 cm – 80 cm (measured at the seat section)
65° ± 5° incl. backrest retraction by approx.
11.5 cm
30° ± 5° incl. thigh rest retraction by approx.
4.8 cm
Head-end approx.15° / foot-end approx.15°
250 kg (215 kg resident with 35 kg mattress +
accessories) *
ca. 145 kg (depending on configuration)
IPX4
II
INT 2 min./18 min.
The equipment is not intended for continuous
operation. After 2 minutes of operation at full
load,a break of 18 minutes is recommended.
CAT 5
ca. 57 dB/A
3 und 5
30% – 75%
800 hPa – 1060 hPa
+10°C – +40°C
If used, cleaned, serviced and repaired correctly,
a useful life for our products of 10-15 years can
be expected.
Excluded from this are wear parts such as
castors, electrical components, etc.
wissner-bosserhoff GmbH
Hauptstraße 4 – 6
58739 Wickede (Ruhr)
GERMANY
Tel. +49 2377 784-0