wissner-bosserhoff sentida 7-i Notice D'utilisation page 78

Attention!
Side guards not locked correctly can slide down and cause the resident to fall. By
shaking the side guard, make sure that it has clicked into the right position. The
correct engagement can also be visually inspected: The yellow locking buttons in
the locking recess of the telescope mechanism must be recognizable on both sides.
Caution!
The SafeFree
ning or pulling. Such overloading has to be avoided.
At each side of the bed, the SafeFree
button on the bottom side of both ends of the handrail, with which the lock can be unlocked.
It can be extended in 4 steps up to the height of 400 mm.
Move the side guard with both hands to ensure smooth lowering/raising in both
guide rails.
Release buttons
1. level: Barrier-free
Side guard is in the lowered position.
3. level: Safety
Complete protection at a height of 340 mm.
78
side guard could get overloaded and damaged by heavy loads, lea-
®
side guard is divided into two parts. There is a release
®
2. level: Mobilization
3/4 protection at a height of 242 mm.
4. level: Increased safety
More safety at a height of 400 mm for thicker
mattresses.