Preparing The Product For Use; Safety Precautions Before Use; Contents And Unpacking; Safely Disposing Of Packaging Material - Videotec ULISSE PLUS Manuel D'instructions

Unité de positionnement de grandes dimensions
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6 Preparing the product
for use
Any change that is not expressly approved
h
by the manufacturer will invalidate the
guarantee.
h
All other parts must not be disassembled
or tampered (excepting for mounting and
maintenance operations according the
present manual).
6.1 Safety precautions before
use
g
In the 120/230Vac powered configuration
it is necessary to insert a 1 0 unipolar
main switch (open contact distance
d>3mm) upstream on the power line. This
switch should be used to disconnect the
power supply before carrying out any
maintenance operation or before opening
the housing.
The appliance includes moving parts. Make
h
sure that the unit is positioned where it
is inaccessible under normal operating
conditions. Attach the warning label
supplied with the appliance, placing it near
the unit so that it can be seen easily.
Fig. 05

6.2 Contents and unpacking

When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
Keep the packaging in case you need to send the
product for repairs.
Check the contents to make sure they correspond
with the list of materials as below:
• ULISSE PLUS positioning unit
• Accessories box:
• Allen key
• Sachet desiccant
• Attachment plate with screws
• Bolts and screws
• Serial extension cable
• Serial adapter
• Label
• Silicon sheath
• Ties
• Reduction gaskets for cable glands
• Instructions manual
• Power Supply Base Box:
• Power supply base
6.3 Safely disposing of
packaging material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
Bear in mind that if the material has to be returned
due to a fault, using the original packaging for its
transport is strongly recommended.
11

Publicité

Table des Matières
loading

Table des Matières