Configuration; On Screen Menu (Osm); How To Use The Joystick; How To Move Around The Menus - Videotec ULISSE PLUS Manuel D'instructions

9 Configuration

9.1 On Screen Menu (OSM)

During normal ULISSE operation it is possible to
activate the On Screen Menu in order to set the
advanced functions using the corresponding key/s
(see the handbook for the keyboard you are using).
Exit the On Screen Menu with Zoom Wide (or
Zoom-).

9.1.1 How to use the joystick

All operations in the menus are carried out using the
joystick.
Left
Fig. 44 Pan & tilt.
Exit
Fig. 45 Zoom wide & tele.
j If using a control keyboard with a dual axis
joystick, use the Zoom Wide and Zoom
Tele keys to carry out the Exit and Confirm
commands.
Up
Right
Down
Confirm
9.2 How to move around the
menus
Each page of the OSM shows a list of parameters or
sub-menus that can be selected by the operator. To
scroll through the parameters move the cursor by
operating the joystick (up and down).
MANUAL CONTROL
------------------------
1 MAXIMUM SPEED
2>VEL. WITH ZOOM :
3 TILT FACTOR
4 MOVEMENT LIMITS
Fig. 46
The symbol > at the end of a line indicates the
presence of a specific submenu. To enter the
submenu just confirm the menu item. To exit the
submenu use the Exit funcjtion (Zoom Out).
MANUAL CONTROL
------------------------
1 MAXIMUM SPEED
2>VEL. WITH ZOOM :
3 TILT FACTOR
4 MOVEMENT LIMITS
Fig. 47
: 20.00
N
: 2
>
: 20.00
N
: 2
>
25