Balluff BML-M0 Série Notice D'utilisation page 47

BML-M0 _ -... / BML T _ _ -...
Magnetic Tape – Magnetic Encoder System
7
Type code (continued)
For meaning of L1, L2, L3 see section 3.4.2 on page 8
1)
Pole width Type designation / accuracy class
2)
BML-M0_-I32_-...
BML-M0_-I33_-...
1 mm
BML-M0_-I34_-...
BML-M0_-I35_-...
BML-M0_-I45_-...
5 mm
BML-M0_-I46_-...
10 mm BML-M0_-I68_-...
Position reference point(s):
3)
Pole width 1 mm: min. 2 cm from beginning/end of the tape, or min. 2 cm between reference points.
Pole width 5 mm: min. 4 cm from beginning/end of the tape, or min. 4 cm between reference points.
Tape length [cm] Measuring length
0007...0090
0007...0200
Tape length – 2 cm
0007...4800
Tape length – 4 cm
english 21