Technical Data - Husqvarna P 520DX Manuel D'utilisation

Technical data

Dimensions
Weight without cutting deck, with empty tanks, kg
Tire dimensions
Tire pressure, rear – front, kPa/bar/PSI
Max. gradient, degrees
Engine
Brand/Model
Nominal engine output, kW @ 3000 rpm
3
Displacement, cm
Max. engine speed, rpm
Max. speed forward, km/h / mph
Max. speed reverse, km/h / mph
Diesel fuel, min. octane grade
Tank volume, l (at max. fuel level indication)
Oil, API class CF-4 or better
Oil volume with filter, l
Oil volume without filter, l
Start motor
Cooling system
Cooling system capacity, l
Antifreeze
Hydraulic system
Max. working pressure, bar/psi
Max. workflow l/min
1
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
2
To meet the emission regulations, the fuel need to meet the standard EN590 or ASTM D975 and have a Sul-
phur content of less than 500ppm or 0.05% of weight. Please refer to the Kubota Operators Manual for further
information regarding fuel quality
60
Technical data
1
2
P 520DX
Product dimensions (P 520DX/P 525DX) on
Refer to
page 64 and Product dimensions (P 525DX Cabin) on
page 65 .
649
20 × 8 - 10
150/1.5/22
10
Kubota/D902
14.7
898
3300
17.6/10.9
13.4/8.3
45
22
Class SAE10W-40
3.3
3
Electric start 12 V, 40 Ah
3.7
≥ 50% propylene glycol
(MPG)
120/1740
12
P 525DX / P 525DX Cabin
677
921 (P 525DX Cabin)
20 × 10 - 10
150/1.5/22
10
Kubota/D1105
17.8
1123
3200
19/11.8
15/9.3
45
22
Class SAE10W-40
3.3
3
Electric start 12 V, 40 Ah
3.7
≥ 50% propylene glycol
(MPG)
120/1740
12
1593 - 005 - 25.10.2021