Husqvarna P 520DX Manuel D'utilisation page 28

3. Pull the circulation lever to the right (A) to engage
the air circulation throttle. Pull the circulation lever to
the left (B) to disengage the air circulation throttle.
To stop the engine
1. Park the product on level ground.
2. Apply the parking brake.
3. Push the PTO button to disengage the drive on the
cutting deck.
4. Push the lever for the hydraulic lift arms forward to
lower the cutting deck to the ground.
5. Move the throttle control rearward to the low speed
position.
28
6. Turn the ignition key to the STOP position.
A
B
7. At the end of operation, or when you do
maintenance on the product, turn the main switch to
the OFF position.
To apply and release the parking brake
1. To apply the parking brake, move the parking brake
lever fully forward.
2. To release the parking brake, move the parking
brake lever fully rearward.
ON
1593 - 005 - 25.10.2021