Tens Programs - I-Tech MIO-CARE TENS Notice D'utilisation

3. Select the program group using the MODE button (no selection is
necessary for the TENS model).
4. Select the program using the PRG key (for the TENS model select the
program using the PRG+ and PRG- keys).
5. To start the session press
and increase the output current intensity till the personal tolerance level
is reached (stimulation comfort).
display. The
too high.
6. Stimulation intensity is showed on the display in a scale progressing
from 0 to 50.
7. At the end of the program (always pre-set by the manufacturer), the
stimulator will return to the initial screen of the selected program
setting the intensity to zero.
8. To turn MIO-CARE off press ON/OFF key.
Stop program command: pressing the ON/OFF button once whilst the program is
running interrupts the program.
WARNING! MIO-CARE will enter into sleeping mode, if no key is press for
longer than 2 minutes to preserve battery.

TENS programs

WARNING! It must be remembered that an electronic stimulator is a
very effective analgesic instrument and that pain can indicate various
types of medical conditions!
The programs described in this paragraph are analgesic. You are advised to read
the ENTIRE manual carefully before using MIO-CARE.
IACER Srl
key of the selected channel CH1 or CH2
key can be used to reduce the power if the intensity is
76
icon starts blinking on the
MNPG95-05