REMS CamSys Notice D'utilisation page 14

eng
5. Faults
5.1 Fault: No photo in the display after switching on (Fig. 1 (6)).
Cause:
● Battery empty.
● Connecting cable (Fig. 4 and 5 (24)) not connected.
● After switching on the controller unit (Fig. 1 (1)) of CamSys 2, when using
camera cable set S-Color S 30 H or camera cable set S-Color S-N 30 H.
5.2 Fault: Display does not change although camera is moved and a button is pressed.
Cause:
● Screen content of the display (Fig. 1 (6)) no longer moves.
5.3 Fault: It is not possible to record photos and videos.
Cause:
● SD card not inserted.
● SD card has activated the lock function (write protection).
● SD card defective.
6. Disposal
REMS CamSys and REMS CamSys 2 may not be thrown in the domestic waste
when no longer used. They must be disposed of properly by law.
7. Manufacturer's Warranty
The warranty period shall be 12 months from delivery of the new product to the
fi rst user. The date of delivery shall be documented by the submission of the
original purchase documents, which must include the date of purchase and the
designation of the product. All functional defects occurring within the warranty
period, which are clearly the consequence of defects in production or materials,
will be remedied free of charge. The remedy of defects shall not extend or
renew the warranty period for the product. Damage attributable to natural wear
and tear, incorrect treatment or misuse, failure to observe the operational
instructions, unsuitable operating materials, excessive demand, use for unau-
thorized purposes, interventions by the customer or a third party or other
reasons, for which REMS is not responsible, shall be excluded from the warranty
Services under the warranty may only be provided by customer service stations
authorized for this purpose by REMS. Complaints will only be accepted if the
product is returned to a customer service station authorized by REMS without
prior interference in an unassembled condition. Replaced products and parts
shall become the property of REMS.
The user shall be responsible for the cost of shipping and returning the product.
The legal rights of the user, in particular the right to make claims against the
seller under the warranty terms, shall not be affected. This manufacturer's
warranty only applies for new products which are purchased in the European
Union, in Norway or in Switzerland.
This warranty is subject to German law with the exclusion of the United Nations
Convention on Contracts for the International Sales of Goods (CISG).
8. Spare parts lists
For spare parts lists, see www.rems.de → Downloads → Parts lists.
14
Remedy:
● Connect power supply unit/charger to charging/machine socket (Fig. 2 (17)),
charge the battery.
● Connect connecting cable, see 2.
● Press the LED brighter button (Fig. 1 (13)) until the photo of the pipe camera
appears in the display.
Remedy:
● Press the Reset button (Fig. 3, Fig. 2 (21)) with a bent paper clip for example.
The controller unit restarts.
Remedy:
● Insert SD card, see 2.1
● Deactivate lock function (write protection).
● Replace SD card.
eng