6
Extensions for automation
Modules
Mounting and dismounting function modules
Dismounting
1. Disconnect the drive controller from mains and wait at least 3 minutes!
2. To unlatch the circlip 4, position the screwdriver between the circlip and the function module
and press it to the right. Then remove the circlip 4.
3. Grasp the bar of the plug connector 3 using tongs and unplug the plug connector together
with the function module 2.
4. Fit the FIF cover 0 onto the FIF interface.
132
l
8200vec612
EDK82EV113 DE/EN/FR 11.0