Disabling The Machine; Problems And Solutions; Problems, Causes And Solutions - Berkel BF+15F Mode D'emploi Et D'entretien

7.4 - Disabling the machine

The machine is made up of materials such as aluminum, steel and copper; therefo-
re they do not require particular procedures for their scrapping.
Therefore contact companies specialized in trash disposal, separating the compo-
nents by material.
8

Problems and solutions

8.1 - Problems, causes and solutions

Problems
The machine does not
start
The thrust of the plug is
not linear
Oil leak
Causes
The plug is not correctly
inserted in the outlet
The electrical motor is
broken down
The command pedal mi-
croswitch is defective
The pressure gauge is
broken down
Air is present in the
hydraulic circuit or there is
a lack of oil
The oleodynamic cylinder
gaskets are worn
The hydraulic circuit pipe
is closed incorrectly or
insufficiently
20
Solutions
Carefully insert the plug in
the outlet
Contact technical assi-
stance
Contact technical assi-
stance
Contact technical assi-
stance
Contact technical assi-
stance
Contact technical assi-
stance
Contact technical assi-
stance